|
|
“V” Twist-Lock Support
Stowage for boat poles, gaffs, nets, spear guns, etc.
|
|
|
10" Track “V”
Twist-Lock
Support Kit
Colors: RC302 (White) and RC303 (Black), includes 2 “V” locks, 2 screws,
2 washers & (1) 10" track
Retail price $56.00
|
|
|
|
20" Track “V”
Twist-Lock
Support Kit
Colors: RC304 (White) and RC305 (Black), includes 2 “V” locks, 2 screws,
2 washers & (1) 20" track
Retail price $64.00
|
|
|
|
“V”
Twist-Lock Bracket
Colors: RC300 (White) and RC301 (Black)
Retail price $35.00
|
|
|
|
|
PVC Track
PVC track is 20" long and made of sturdy PVC plastic so it will not rust.
One track holds all Roll Control accessories, including standard or adjustable brackets,
wine and beverage holders, rod holders, cleats and more. Or, put two tracks end-to-end
and slide in more! Comes with snap-in end caps to finish track and serve as positive
stop. It’s the perfect addition to your boat’s interior. “H”
alignment connector for combining tracks also included. Hardware not included. Colors:
Black #346, White #345
Retail Price $24.60
ea.
|
|
|
|
|
Aluminum Track
Start with the heavy-duty
48" x 1-7/8" anodized aluminum track to custom design your accessory system.
Mounts to any surface—boat transoms, gunnels, vans,
and truck beds. May be cut to any length. One track holds up to five tank brackets
(four, if end caps are installed). Holds standard
and adjustable brackets, rod holders, accessory mount, rope cleat and drink holder.
Clear Anodized #174
Retail Price $29.10
ea.
|
|
|
|
|
Molded
Track
11-1/2" x 3" molded plastic
track features modern design with no sharp edges. Holds one standard or adjustable
tank bracket or two accessories: drink holder, rope cleat, rod holder or accessory
mount. The perfect add-on for boats, personal watercraft
and jet boats!
Colors: Black, White
Black - #227
White - #226
Retail Price $16.80
ea.
|
|
|
|
|
Standard Tank Brackets - Vertical
Standard brackets (one-piece)
slide into Roll Control aluminum or molded track to safely transport tanks vertically
to your dive destination. Made of durable polypropylene, standard brackets are available
in three sizes to fit 72, 80 or 100 cubic inch tanks. Sold in sets of two.
Colors: Black, White
Black "72" #147
White "72" #148
Black "80" #151
White "80" #154
Black "100" #155
White "100" #158
Retail Price $24.50
pair
|
|
|
|
|
Adjustable Tank Brackets
Durable polypropylene adjustable
tank brackets (two-piece) slide into aluminum or molded track to safely transport
tanks vertically to your dive destination and fold down flat when not in use. Fits
all size tanks. (Not for use with tank handles.)
Sold in sets of two.
Colors: Black, White
Black #222
White #223
Retail Price $37.00
pair
|
|
|
|
|
Solid
Locking type bracket
Rugged PVC bracket locks
in position in track while holding tank with heavy duty elastic strap. Fits 80 cu
in. (7.2" dia.) & larger.
Sold in set of 2 brackets & strap.
Black #420
White #430
Retail Price $37.00
pair
|
|
|
|
|
Double
Tank Adapter
Adapter for Adjustable
tank brackets extends bracket to hold a double tank, fold down and adjust to different
size tanks,
Set of 2 for 2 brackets
Black #400
White #410
Retail Price $29.00
pair
|
|
|
|
|
Rod Holders
Heavy-duty one-piece injection
molded rod holders lock into mounted aluminum or molded track and provide multiple
rod holders for trolling or convenient on-board storage. Straight or 30° port
or starboard angles available.
Colors: Black, White
Black Port #220
White Port #176
Black Starboard #219
White Starboard #173
Black Straight #221
White Straight #177
Retail Price $16.80
ea.
|
|
|
|
|
Rod
Holder Kit
Complete kit includes
three sturdy, one-piece injection molded straight rod holders and one 16-inch predrilled,
anodized aluminum track. Perfect for on-board storage.
Colors: Black, White
Black #218
White #217
Retail Price $49.25
kit
|
|
|
|
|
Tank
Handles
Plastic handles snap into
standard tank brackets for easy carrying to and from
dive. (Not for use with adjustable brackets.) A must for all divers, whether you
rent or own your own tanks.
Colors: Black, White
Black #159
White #205
Retail Price $14.50
pair.
|
|
|
|
|
Track Mount Beverage Holder
Molded polypropylene beverage
holder slides into aluminum or molded track and swings
freely to prevent spills. Holds cans, mugs, bottles and insulated beverage holders—even
sunglasses & cell phones! No metal parts; will not rust.
Colors: Black, White
Black #199
White #200
Retail Price $7.00
|
|
|
|
|
Suction Mount Beverage Holder
Molded polypropylene beverage
holder with suction mount holds firmly to smooth, flat surfaces (glass, fiberglass
or other smooth surface) and swings freely to prevent spills. Holds cans, mugs,
bottles and insulated beverage holders—even sunglasses & cell phones! No
metal parts; will not rust.
Colors: Black, White
Black #209
White #210
Retail Price $9.40 ea.
|
|
|
|
|
Adhesive Mount Beverage Holder
1-1/2" mounting block
mounts permanently to glass, fiberglass, metal—virtually any clean, smooth
surface. Cup holder is removable while block remains in place. Holds cans, mugs,
bottles and insulated beverage holders—even sunglasses & cell phones! No
metal parts; will not rust.
Colors: Black, White
Black #213
White #214
Retail Price $8.25 ea.
|
|
|
|
|
Wine Glass Holder
Molded polypropylene beverage
holder slides into aluminum or molded track and swings
freely to prevent spills. Safely holds a variety of wine glass styles. No metal
parts; will not rust. Also available in Suction and Adhesive Mount.
Colors: Black, White
Black Track Mount #332
White Track Mount #333
Black Adhesive Mount #340
White Adhesive Mount #341
Black Suction Mount #336
White Suction Mount #337
Retail Price $7.00 ea.
Track mount, $8.25 ea. Adhesive Mount, $9.40 ea. Suction Mount
|
|
|
|
|
End
Cap & Stop Kit
Made of tough PVC plastic,
two end caps protect and finish the ends of mounted aluminum tracks and double as
an adjustable positive stop for tank brackets mounted in trucks and vans. Stainless
steel hardware included.
Color: White, Black
Black #204
White #203
Retail Price $9.50 ea.
|
|
|
|
|
Rope Cleat
Rugged PVC rope cleat
slides into aluminum or molded track and locks in place to position fenders where
needed. Also allows for additional lines for rafting or docking.
Color: White, Black
Black #330
White #178
Retail Price $6.15 ea.
|
|
|
|
|
Accessory Mount
White PVC accessory mount
allows non-Roll Control products, such as bench cushions, boxes, mirrors and other
boat accessories, to be used with the aluminum or molded track. Attach item to accessory
mount and slide into track for a temporary addition.
Colors: White, Black
Black #331
White #179
Retail Price $3.35 ea.
|
|
|
|
|
Mounting
Kit
Solid PVC adjustable angle
mounting kit facilitates mounting aluminum track to curved surfaces. Kit includes
stainless steel hardware required to mount a single track. (Not for use with molded
track.)
Color: White only
White #175
Retail Price $12.30
ea.
|
|
|
